EK280
9.6 Modifications archive (audit trail)
Changes to settings (parameterization) is archived in the audit trail.
The content of the audit trail can be shown on the display of the device via the path
"Audit Trail".
i
The modifications archive is not a flexible archive.
9.6.1 Archive content
Pos.
Address
Display
1
01:01F8 GONo
2
05:0A20 ABNo
3
01:0400 Time
4
05:0810 Addr
5
05:0811 old
6
05:0812 new
7
01:0170 St.PL
8
02:0170 St.ML
9
03:0170 St.AL
10
04:0170 St.CL
11
05:0A21 Check
The values can be retrieved in accordance with the information in the table via D = display and/or
1
I = interface.
9.6.2 Memory capacity
The archive can store the last 200 settings changes (parametrization).
i
The modification archive is a ring-type memory. If the archive is full then the oldest entries are
overwritten.
9.6.3 Deleting the modification archive
chapter
2.4.2 Clear volumes and archives ("Clr.V")
9.7 Updates archive
Attempted or completed updates of the device software are archived in the updates archive via an interface.
The content of the update archive can be shown on the display of the device via the path
"Archives" > "Update
archive".
Application Manual
Description
Global Block number
Archive Block number
Date and time
Address
old value
new value
Status of calibration lock
Status of manufacturer lock
Status of administrator lock
Status of customer lock
Check sum result ( „CRC OK" or „Error")
206
"Serv." > "Archives" >
Retrievable
1
S
A + S
A + S
A + S
A + S
A + S
A + S
A + S
A + S
A + S
A + S
"Serv." >