Honeywell EK280 Applications Manual page 131

EK280
i
With a field strength below 50% data transfer issues may be encountered. Adjusting the antenna
position can improve field strength in most cases.
7.4.6.4 Retrieving data with enSuite
− If the call window is not open ( chapter
unique "Test" time window can be set up for verification purposes:
a) Opening the test time window for the following test retrievals with enSuite
i
The test time window only needs to be open if none of the time windows 5 to 6 is currently open.
− If the communication link to the EK280 via the optical interface is not set up, it must be created.
( chapter 3.1 Setting up the communication link to the EK280 via optical
− Select "Navigation" on the left-hand side of the enSuite window and then
the bottom of the navigation window.
− In the top of the navigation window click first on the plus sign next to "Parameters", then on the plus
sign next to "Interfaces" and then on
− Click on the "0" value next to
enter a duration in minutes (i.e. 10), for the test time window for the test retrieval to remain open.
− Press the "Transfer changes to
The EK280 is now available via the modem for the duration set.
− In enSuite press the "Disconnect" symbol or
b) GSM-CSD Test retrieval via the modem
− Set up the modem communication link from enSuite to the EK280.
( chapter 3.2 Setting up the communication link to EK280 via a
− Once the communication link is set up, you can carry out checks, for instance view certain
parameters. To do this press "Navigation" on the left-hand side of the enSuite window and then
"Parameterize online" in the bottom of the navigation window, then click on the plus sign next to
"Parameters" and then its subsections.
− In enSuite press the "Disconnect" symbol or
c) GPRS-TCPserv Test retrieval via the modem
Set up the modem communication link from enSuite to the EK280.

( chapter 3.3 Setting up the communication link to EK280 via a network
Once the communication link is set up, you can carry out checks, for instance view certain

parameters. To do this press "Navigation" on the left-hand side of the enSuite window and then
"Parameterize online" in the bottom of the navigation window, then click on the plus sign next to
"Parameters" and then its subsections.
In enSuite press the "Disconnect" symbol or

Application Manual
7.4.6.1 EK280 Parametrization
"Terminal interface".
"Test call acceptance window" in the right-hand side of the window and
device" icon at the top of the enSuite window.
"Disconnect from all
"Disconnect from all
"Disconnect from all
(p. 121), section c), a
interface, p. 19)
"Parameterize online" at
devices" to end the test retrieval.
modem, p. 19)
devices" to end the test retrieval.
(TCP/IP), p. 20)
devices" to end the test retrieval.
129