EK280
2.1.4 User values for the administrator
i
For parameterization of the EK280 you need a connection cable for the optical interface as well
as the enSuite program. enSuite can be downloaded free of charge from the Honeywell website
in the "Software Downloads" section:
www.elster-instromet.com/en/software-downloads
All values displayed on the "Admin." tab under
−
Connect a PC or laptop with enSuite installed to the EK280 optical interface using the connection
cable.
−
Start enSuite and set up the communication link to the EK280.
( chapter
3.1 Setting up the communication link to the EK280 via optical
−
Select "Navigation" on the left-hand side and then
navigation window.
−
In the top of the device window open the path "Parameters" >
clicking on the relevant plus signs, and then select
−
By using the "All Parameters" tab in the right-hand part of the window, you can now select which
values are to be displayed. To do this, press an entry in the "Value" column, and then the button with
the three dots. You can now select a new value to be displayed for this position in the display in the
window that opens up.
−
With the first 10 values you select what will be displayed in the display of the unit under the tab
"Admin."
under
"User
content of display via the path
−
Once you have set all values, click on the "Transfer changes to device" icon at the top of the enSuite
window.
2.2 Displaying archives on the EK280
i
A comprehensive description of the archive can be found in chapter 8.3.3)
To display the contents of an archive, move the cursor to the archive header and press the ENTER or key.
The Archive Headers are located on the
Status.
Application Manual
"User
values" can be set using enSuite:
values". With the next 12 values you select what will be displayed as the
"User
values" > "further...".
Admin.
and
Serv.
interface, p. 19)
"Parameterize
online" at the bottom of the
"Device
settings" > "Display" by
"User column
'Administrator'".
tabs under Archives, the log books also are under
10