Event-Output - Honeywell EK280 Applications Manual

EK280
Sc.O... Description
01:143_0 for the beginning of each month at midnight
02:143_0 for the beginning of each month at 6am
The daily limit "6am" (monthly limit) can be changed via
01:142_0 for the beginning of each day at midnight
02:142_0 for the beginning of each day at 6am
The daily limit 6am (monthly limit) can be changed via
01:403_0 at the beginning of every hour
− Press the ENTER key to confirm the set value. It is possible to abort the entry by pressing the ESC
key.
c) Setting up pulse duration:
i
Parametrization of the pulse duration via the EK280 keyboard is only possible with software
version 2.20 or later.
Older software versions may be programmed using enSuite via
"Parameters" and the paths described ( chapters 6.2.1, 6.4.1)
i
The pulse duration can be set as a multiple of 125 ms for each output.
− When in the corresponding menu press the key  until "PW.O1", "PW.O2",
displayed.
− Press the ENTER key. ⇒ The actual parameterized value flashes.
− Move the cursor to the digits using the  or  arrow keys and update them using the  or  arrow
keys to set the desired period.
− Press the ENTER key to confirm the value setting. Input can be canceled using the ESC key.

6.5 Event-output

Each of the outputs 1 to 4 (terminals DA1 to DA4) can be programmed as an event-synchronized output.
An event output basically functions as a status output ( chapter 6.3), however the pulse duration can also
be set. In the case of a status output, however, the pulse lasts as long as the corresponding status message.
Application Manual
Serv.  Date and time
Serv. Date and time
 
"Parameterize online" >
or.
"PW.O3" "PW.O4"
49
 DayB.
DayB.
is