Check Sms Dispatch; Additional Functions For Sending Sms Messages - Honeywell EK280 Applications Manual

EK280

8.3.3 Check SMS dispatch

The transmission of an SMS can be executed manually regardless of the configured event.
− Change your short message in the enSuit submenu
"SMS" > "Settings" >
− Use the command: Send short message now. Press the "Execute" button.
− Press the "Update"
i
Repeat this process at regular intervals in order to obtain the latest EK280 status.
− You can follow the progress of the SMS transmission with the following status parameters.
SMS Description
NStat Current Message Status ( Chapter 7.6.3)
SDst1, 2 The current status of the SMS dispatch to the receiver 1, 2 ( chapter 7.6.4).

8.3.4 Additional functions for sending SMS messages

8.3.4.1 Reset the SMS buffers
All outgoing SMS messages are written to a buffer and can thus be repeated if necessary. On
commissioning, incorrect settings can also be entered which will generally make the delivery of the SMS
impossible. For example, if no telephone number is entered for the receiver, it can not be sent. Repeat
cycles and buffer storage also don't improve the situation. Therefore it may be necessary to remove such
"old" SMS from the buffer!
− Change your short message in the enSuite submenu
Interfaces > SMS
− Optionally you can also reset the interface itself under:
Interfaces > Internal modem
− Interfaces > Terminal interface
8.3.4.2 Limit the number of repetitions
A number of repeat attempts may be applied for sending an SMS. There is a pause of 60 seconds after each
attempt, before a new attempt is initiated. Depending on the faults detected ( above), these are also
suppressed immediately
Address
2:732 "No.D"
3:732 "No.D"
Application Manual
"SMS 1" bis "SMS 10"
button at the top end of enSuite to display current information in enSuite.
> Setting > Clear SMS buffer
> Reset modem interface „ResI3"
> Reset terminal interface „ResI2"
Description
The number of retries for sending an SMS (terminal interface)
The number of retries for sending an SMS (internal modem)
bzw.
189