Delete Monthly Archive 1; Monthly Archive 2 (Measured Values) - Honeywell EK280 Applications Manual

EK280
9.3.4.2 In the previous month
− To display the volumes relating to the monthly limit, move the cursor to
"previous month".
Display
VbMP↑ Maximum VbMP of last month
VbDy↑ Maximum VbDy of last month
VbMo ∆ Vb Monthly interval meter progress of the previous month
VmMP↑ Maximum VmMP of last month
VmDy↑ Maximum VmDy of last month
VmMo ∆ Vm Monthly interval meter progress of the previous month
W.MP↑ Maximum W.MP of last month
54
W.Dy↑ Maximum W.Dy of last month
54
The counter progress compared to the respective previous entry is denoted with a "∆". Normally it is a flow
(consumption) in this case within a day. This, however, does not apply when an archive row is entered due
to a particular event (e.g. setting the clock or a counter, appearance of an important status message). The
meter reading flashes with the meter progress to point out this feature to the user (for further information,
refer to the instruction manual "usage as a registration device").

9.3.5 Delete monthly archive 1

 chapter 2.4.2 Clear volumes and archives ("Clr.V")

9.4 Monthly archive 2 (Measured values)

In monthly archive 2 maximum, minimum and occasionally median values for Qb, Qm, p, T the previous
months are archived on a monthly basis based on the monthly limit (= daily limit on the first day of each
month).
The content of monthly archive 2 can be shown on the display of the device via the path
> "Monthly Archive 2".
i
Monthly archive 2 is a flexible archive.
Archive contents and the memory capacity can be adapted with corresponding settings via
parameterization software enSuite when the administrator lock is open.
Our applications team is available if you require further information.
Application Manual
Description
or 2.4.3 Clear archives ("Clr.A")
"Serv." > "Volume" >
"Serv." > "Archives"
201