Honeywell EK280 Applications Manual page 159

EK280
7.5.4.2 EK280 jumpers
X6: No jumper
or one jumper on the pins located
near the terminals
7.5.4.3 EK280 Parameterization
i
For parameterization of the EK280 you need a connection cable for the optical interface as well
as the enSuite program. enSuite can be downloaded free of charge from the Honeywell website
in the "Software Downloads" section:
www.elster-instromet.com/en/software-downloads
Follow the steps given in  chapter
Application Manual
X5: two jumpers
on the pins located
furthest from the terminals.
7.5.3.3 Parametrization of the EK280 (p. 154).
157