Honeywell EK280 Applications Manual page 190

EK280
SMS Definition
Event EK280 event, at occurrence the message will be transmitted. Within enSuite, press the
button and select a status, a unique event or a regular event from the list shown.
NoRcv 0 = no conn. (SMS is not active; will not be sent to any recipient)
1 = Dest 1 or 2 (SMS will be sent only to the first recipient which is reachable)
2 = Dest 1 and 2 (SMS will be sent to both recipients)
LayNo SMS layout number in the range 1 – 15 ( a))
Iface Interface 2 = serial interface or 3 = internal modem, where the GSM modem is connected.
Rcv1, 2 Receiver number related to EK280 phone book ( b))
Way1, 2 0 = message will be sent as SMS
1 = message will be sent as email
2 = message will be sent as fax
Delay Delay of transmission in minutes since event occurs.
PrTyp 7 = short SMS  in case of recipient is not able to display messages with more than
160 characters. The message may be split into multiple short messages.
8 = long SMS  in case of recipient is able to display concatenated messages with more
than 160 characters.
After you changed EK280 parameters activate
s) Configure individual parameters
− To transmit a message as email of fax you have to configure abbreviated numbers (different for each
mobile service provider).
− Use the enSuite menu
Address
2:739
(if modem
connected to serial
interface)
3:739
(if internal modem)
2:73A
(if modem
connected to serial
interface)
3:73A
(if internal modem)
i
If your mobile service provider is not shown please contact your IT department.
Application Manual
"Transfer changes to
"Read and set single
Definition
Abbreviated numbers for email gateway. Known numbers:
Telecom-D1: 8000
Vodafone-D2: 3400
E-Plus: 7676245
O2: 6245
Abbreviated numbers for fax gateway. Known numbers:
Telecom-D1: 99
Vodafone-D2: 99
E-Plus: 1551
O2: 329
device" at the menu bar in enSuite.
parameters"
188