Deleting The Calibration Data Log; User Archive; Archive Content; Memory Capacity - Honeywell EK280 Applications Manual

EK280

9.8.4 Deleting the calibration data log

i
The calibration data log is also deleted via the function "ClrV" ( chapter
and archives ("Clr.V")).
− In order to delete the calibration data log on the device, open the calibration lock as described in the
 EK280 Operating Instructions [1].
Move the cursor to
−
− Press the ENTER key. ⇒
− Change the value using the arrow keys  or  to "1".
− Press the ENTER key to confirm the set value. It is possible to abort the entry by pressing the ESC
key.

9.9 User archive

The EK280 has five user archives (archive 11, archive 12, archive 13, archive 14 and archive 15).
The contents of the user archives can be shown on the display of the device via the path
> "User archives" > "Archive 11"
i
User archives are flexible archives.
Archive contents and the memory capacity can be adapted with corresponding settings via
parameterization software enSuite when the administrator lock is open.
Our applications team is available if you require further information.

9.9.1 Archive content

i
The establishment of a user archive is preconfigured with factory settings and can be adapted
with corresponding settings files via parameterization software enSuite when the administrator
lock is open.
Our applications team is available if you require further information.

9.9.2 Memory capacity

i
The memory capacity of a user archive is preconfigured with factory settings and can be adapted
with corresponding settings files via parameterization software enSuite when the administrator
lock is open.
Our applications team is available if you require further information.
i
The user archives are ring-type memories. If the archives are full then the oldest entries are
overwritten.
Application Manual
>
"Serv." "Archives" > "ClrCDL".
"0" flashes.
or "Archive 12" or "Archive 13"
2.4.2 Clear volumes
or "Archive 14" or "Archive
210
"Serv." > "Archives"
15".