Fe260 To Serial Interface; Fe260 Connection - Honeywell EK280 Applications Manual

EK280
7.3.4.4 Retrieving data with enSuite
a) Opening the test time window for the following test retrievals with enSuite
i
The test time window only needs to be open if none of the time windows 5 to 6 is currently open.
− If the communication link to the EK280 via the optical interface is not set up, it must be created.
( chapter 3.1 Setting up the communication link to the EK280 via optical
− Select "Navigation" on the left-hand side of the enSuite window and then
the bottom of the navigation window.
− At the top of the device window open the path "Parameters" > "Interfaces" by clicking on the relevant
plus signs, and then select
− Click on the "0" value next to
enter a duration in minutes (i.e. 10), for the test time window for the test retrieval to remain open. For
a battery-operated EK280 please do not enter an excessively long duration, as this will adversely
affect the battery life.
Press the "Transfer changes to
−
The EK280 is now available via the modem for the duration set.
− In enSuite press the "Disconnect" icon or
interface communication link between enSuite and the EK280.
b) Test retrieval via the modem
− Set up the modem communication link between enSuite and EK280.
( chapter 3.2 Setting up the communication link to EK280 via a
− Once the communication link is set up, you can carry out checks, for instance view certain
parameters. To do this press "Navigation" on the left-hand side of the enSuite window and then
"Parameterize online" in the bottom of the navigation window, then click on the plus sign next to
"Parameters" and then its subsections.
− In enSuite press the "Disconnect" symbol or

7.4 FE260 to serial interface

− FE260 connection and EK280 configuration via jumper is described in  chapter
− EK280 jumpers (p. 114).
− For FE260 GSM/GPRS (with wireless modem) models only, the SIM card must be inserted as
described in  chapter
the FE260 (p. 115).
− You then proceed according to FE260 version as described in the following  chapter.

7.4.1 FE260 connection

− For the connection of the FE260 to the EK280, the screened 8-core cable must be used which is
included as part of the supply off the FE260. The required cable length must be indicated when the
FE260 is ordered (2m, 5m or special length)
− The individual cores must be taken to the inside of the EK280 through one of the metal unions; the
housing of the EK280 needs to be opened up for this purpose.
Application Manual
"Terminal
interface".
"Test call acceptance
device" icon at the top of the enSuite window.
"Disconnect from all
"Disconnect from all
7.4.2 Differentiation of the radio-controlled modems and their application in
interface, p. 19)
"Parameterize
window" in the right-hand side of the window and
devices" to terminate the optical
modem, p. 19)
devices" to end the test retrieval.
112
online" at
7.4.1