Honeywell EK280 Applications Manual page 140

EK280
- Modem type "ECM-GW120":
EK280_xvx. - FE260 & int. ECM-GW-120 - ComTSC (*)

- Modem type "Integra M2106+" or "Integra M2106B":
EK280_xvx. - FE260 & int. M2106x - ComTSC (*) 31

7.4.8.3 Parameterization of the GPRS-ComTSC-Modem in the FE260
Parameterization of the modem application "ComTSC" in the GSM/GPRS modem may be effected either via
a GSM-CSD modem connection or on location, via the modem parameterization interface on the FE260
modem adapter board.
i
For the parameterization of the "ComTSC" modem application in an FE260, there is also the
separate commissioning instruction ( ID No. 73021403) [8], which is included with every FE260
with a ComTSC modem!
For parameterization of the GPRS-ComTSC modem, please first connect your PC or laptop with the modem
parameterization interface on the modem adapter board in the FE260, as described in  chapter
Parameterization of the GPRS/TCPserv modems in the FE260
The actual parameterization of the TSC function in the ComTSC modem is then performed pursuant to
 chapter 7.1.7.3 Parameterization of the internal ComTSC modem in the EK280
7.4.8.4 Checking GSM field strength
 chapter 7.1.4.2 Checking GSM field strength
7.4.8.5 Retrieving data with enSuite
 chapter 7.1.7.5 Retrieving data with enSuite
31 The "x" stands for the version of software on the device, e.g. "2v2".
The star * stands for a small letter which indicates the version of the file, e.g. "a".
Application Manual
31
(p. 124).
(p. 63)
(p. 81)
138
7.4.6.2
(p. 78).