Entering The Battery Capacity - Honeywell EK280 Operating Instructions Manual

Maintenance
CAUTION!
Material damage may arise through improper closing of
the device!
Improper closing of the device may lead to material damage
as a result of cable connections being squashed.
Therefore:
– When closing, ensure that the cable ducts are positioned

7.2.2 Entering the battery capacity

The battery capacity must be re-entered after changing a
battery.
When using the device with high communication security
(„High Level Security" see application manual), the battery
capacity can only be entered with the enSuite software!
–
For opening the administrator lock move the cursor to the "Admin"
register and to the "Cod.A" value (enter administrator key) via the
following path:

Admin.
After delivery of the device, the administrator key for input
via keypad is "00000000".
Press the ENTER button.  The value will start to flash.
–
Move the cursor using the arrow keys  or  to the digits and
–
change these using the arrow keys  or .
–
After you have changed all digits, press the ENTER button to confirm
the inputs. The input value can be deleted by pressing the ESC
button.
–
For entering the battery capacity move the cursor to the "Serv."
register and to the "Bat.C" value (battery capacity) via the following
path:

Serv.
Press the ENTER button.  The value will start to flash.
–
– Move the cursor using the arrow keys  or  to the digits and
change these using the arrow keys  or .
correctly.
Device settings

Batteries Bat.C
 
Access Cod.A
85