Eigrp Interface Mode Commands - Cisco ONS 15454 SDH Configuration Manual

Chapter 11 Configuring Networking Protocols
Command
Step 6
Router(config)# offset list
[{ access-list-number | name }
out
Step 7
Router(config)# no auto-summary
Step 8
Router(config)# ip summary-address
eigrp autonomous-system-number
address-mask
Step 9
Router(config)# end
Step 10
Router# show ip protocols
Step 11
Router# copy running-config
startup-config
Use the no forms of these commands to disable the feature or return the setting to the default value.
Example 11-8
Example 11-8 show ip protocols privileged EXEC Command Output (for EIGRP)
Router# show ip protocols
Routing Protocol is "eigrp 1"
Outgoing update filter list for all interfaces is not set
Incoming update filter list for all interfaces is not set
Default networks flagged in outgoing updates
Default networks accepted from incoming updates
EIGRP metric weight K1=1, K2=0, K3=1, K4=0, K5=0
EIGRP maximum hopcount 100
EIGRP maximum metric variance 1
Redistributing: eigrp 1
Automatic network summarization is in effect
Automatic address summarization:
Maximum path: 4
Routing for Networks:
Routing Information Sources:
Distance: internal 90 external 170

EIGRP Interface Mode Commands

Other optional EIGRP parameters can be configured on an interface basis.
Beginning in privileged EXEC mode, follow these steps:
} [ ]
offset type-number
shows the output for the show ip protocols privileged EXEC command.
192.168.3.0/24 for POS0
192.168.2.0/24 for FastEthernet0
192.168.2.0
192.168.3.0
Gateway Distance
192.168.2.1 90
Cisco ONS 15454 and Cisco ONS 15454 SDH Ethernet Card Software Feature and Configuration Guide, R8.0
Purpose
(Optional) Applies an offset list to routing metrics to increase
] { |
in
incoming and outgoing metrics to routes learned through
EIGRP. You can limit the offset list with an access list or an
interface.
(Optional) Disables automatic summarization of subnet
routes into network-level routes.
(Optional) Configures a summary aggregate.
Returns to privileged EXEC mode.
Verifies your entries.
(Optional) Saves your entries in the configuration file.
Last Update
00:03:16
Configuring EIGRP
11-23