Cisco ONS 15454 SDH Configuration Manual page 500

rpr-ieee pdi holdoff time interval
rpr-ieee pdi holdoff time interval
Use this command to configure the interval that occurs before a path defect indication (PDI) is raised on
an IEEE 802.17b based RPR span.
Syntax Description Parameter
interval
Defaults The default is 100 milliseconds.
Command Modes
IEEE 802.17b based RPR interface configuration
Usage Guidelines This command can be used to prevent holdoff timer switching if a PDI is raised on an IEEE 802.17b
based RPR span. The PDI is an infrequent occurrence in this kind of span configuration.
Examples In this example, interface is shortened to int.
Router(config)# int prp-ieee 0
Router(config-if)# rpr-ieee pdi holdoff time 100
Related Commands
None
Cisco ONS 15454 and Cisco ONS 15454 SDH Ethernet Card Software Feature and Configuration Guide, R8.0
A-24
Description
The period, expressed in milliseconds. The range is 100 to 1,000
milliseconds.
Appendix A Command Reference