Cisco ONS 15454 SDH Configuration Manual page 527

Appendix A Command Reference
show ons alarm defect port
Use this command to display the port-layer defects.
Syntax Description This command has no arguments or keywords.
Defaults
N/A
Command Modes
Privileged exec
Usage Guidelines This command displays the set of active defects for the link layer and the possible set of defects that can
be set. Note that the TPTFAIL defect can only occur on the POS ports and the CARLOSS defect can
only occur on the Ethernet ports.
Examples
router# show ons alarm defect port
Port Defects
POS0
Active: TPTFAIL
Reportable to TCC: CARLOSS TPTFAIL
POS1
Active: TPTFAIL
Reportable to TCC: CARLOSS TPTFAIL
GigabitEthernet0
Active: None
Reportable to TCC: CARLOSS TPTFAIL
GigabitEthernet1
Active: None
Reportable to TCC: CARLOSS TPTFAIL
Related Commands
show interface
show ons alarm failure
Cisco ONS 15454 and Cisco ONS 15454 SDH Ethernet Card Software Feature and Configuration Guide, R8.0
show ons alarm defect port
A-51