Cisco ONS 15454 SDH Configuration Manual page 533

Appendix A Command Reference
show ons alarm failure rpr [interface-number]
Use this command to display failures on a specific IEEE 802.17b based RPR interface.
Syntax Description Parameter
interface-number
Defaults
N/A
Command Modes Privileged exec
Usage Guidelines This command displays the set of active failures for a specific IEEE 802.17b based RPR interface. The
display also specifies if an alarm has been demoted, as defined in Telcordia GR-253-CORE.
Examples
router# show ons alarm failure rpr
RPR-IEEE0
Active: None
Related Commands show ons alarm
Description
Number of the interface (0–1)
Cisco ONS 15454 and Cisco ONS 15454 SDH Ethernet Card Software Feature and Configuration Guide, R8.0
show ons alarm failure rpr [interface-number]
A-57