Cisco ONS 15454 SDH Configuration Manual page 487

Appendix A Command Reference
[no] pos scramble-spe
Use this command to enable scrambling.
Syntax Description This command has no arguments or keywords.
Defaults
The default value depends on the encapsulation.
Encapsulation
LEX
PPP/HDLC
Command Modes Interface configuration mode (POS only)
Usage Guidelines
This value is normally configured to match the setting on the peer PTE. This command might change the
pos flag c2 configuration.
Examples
In this example, interface is shortened to int.
Gateway(config)# int pos0
Gateway(config-if)# pos scramble-spe
Related Commands None
Scrambling
pos scramble-spe
no pos scramble-spe
Cisco ONS 15454 and Cisco ONS 15454 SDH Ethernet Card Software Feature and Configuration Guide, R8.0
[no] pos scramble-spe
A-11