Cisco ONS 15454 SDH Configuration Manual page 538

Hide thumbs Also See for ONS 15454 SDH:

Table of Contents

show rpr-ieee failure rpr-ieee interface-number

Use this command to display all inputs used to determine the failure state of each span on the

IEEE 802.17b-based RPR interface.

Syntax Description

interface-number

Command Modes

Privileged exec

Usage Guidelines

This command is primarily used for troubleshooting. Some of its information overlaps that obtained with

show rpr-ieee topology and show rpr-ieee protection commands.

router# show rpr-ieee failure rpr-ieee0

Self Detected Failures Information for Interface RPR-IEEE0

MAC Keepalive

Link quality

Mate interface

Span mismatch

Result Self Detect = IDLE

MAC Keepalive

Link quality

Mate interface

Span mismatch

Result Self Detect = IDLE

Related Commands

show int rpr-ieee

Cisco ONS 15454 and Cisco ONS 15454 SDH Ethernet Card Software Feature and Configuration Guide, R8.0

IEEE 802.17b based RPR interface number. No space is included between

rpr-iee and the interface number (for example, rpr-ieee0).

Appendix A Command Reference