Qos Configuration Examples; Figure 14-7 Ml-Series Voip Example; Table 14-4 Commands For Qos Status - Cisco ONS 15454 SDH Configuration Manual

QoS Configuration Examples

Table 14-4
Command
Router# show class-map name
Router# show policy-map
Router# show policy-map name
Router# show policy-map interface
interface
Example 14-4
Example 14-4 QoS Status Command Examples
Router# show class-map
Class Map match-any class-default (id 0)
Match any
Class Map match-all policer (id 2)
Match ip precedence 0
Router# show policy-map
Policy Map police_f0
class
police 1000000 10000 conform-action transmit exceed-action drop
Router# show policy-map interface
FastEthernet0
QoS Configuration Examples
This section provides the specific command and network configuration examples:
•
•
•
•
•
•
•
Cisco ONS 15454 and Cisco ONS 15454 SDH Ethernet Card Software Feature and Configuration Guide, R8.0
14-18
Commands for QoS Status
show examples of the QoS commands.
policer
service-policy input: police_f0
class-map: policer (match-all)
0 packets, 0 bytes
5 minute offered rate 0 bps, drop rate 0 bps
match: ip precedence 0
class-map: class-default (match-any)
0 packets, 0 bytes
5 minute offered rate 0 bps, drop rate 0 bps
match: any
0 packets, 0 bytes
5 minute rate 0 bps
Traffic Classes Defined Example, page 14-19
Traffic Policy Created Example, page 14-19
class-map match-any and class-map match-all Commands Example, page 14-20
match spr1 Interface Example, page 14-20
ML-Series VoIP Example, page 14-21
ML-Series Policing Example, page 14-21
ML-Series CoS-Based QoS Example, page 14-22
Purpose
Displays the traffic class information of the user-specified
traffic class.
Displays all configured traffic policies.
Displays the user-specified policy map.
Displays configurations of all input and output policies
attached to an interface. Statistics displayed with this
command are unsupported and show zero.
Chapter 14 Configuring Quality of Service