Onscli-Command Line Interface - Cisco ONS 15305 Quick Installation Manual

Installation Checklist for ONS 15305
The following list is an installation checklist. Use this list as a reference when performing an
installation. For detailed installation instructions, refer to the Cisco ONS 15305 Installation and
Setup Manual (Release 1.0). To check the installation, verify the following items:
• ONS 15305 is mounted securely in the rack.
• Power runs to the ONS 15252.
• Power connections are fused properly (7A recommended).
• –48 VDC (tolerance –40.5 to –60 VDC) power is present.
• Transmit and receive fiber patchcords from the ONS 15454 are correctly connected to the
ONS 15305.
• Fiber-optic patchcords route through the rack.
• Electrical cables route through the rack.
• Each cable is labeled.
For connection to the ONS 15454, see Installing the Cisco ONS 15216 100 GHz DWDM
Note
Filters.
11
ONSCLI—Command Line Interface
ONSCLI is a line-oriented ASCII-based management interface to ONS 15305, by means of which
simple commands—possibly with parameters—can be issued to access or modify the ONS 15305
configuration.
Commissioning the IP Address Using the VT100 Interface
A local terminal with VT100 emulation is required during the first commissioning of the network
element in order to set up the necessary communications parameters enabling access to the element
through Cisco Edge Craft over the management port. After the first commissioning, the VT100
interface can be used to modify the communications parameters and perform status checks of the
network element. The VT100 interface is password protected.
23