Cisco ONS 15454 SDH Configuration Manual page 504

[no] rpr-ieee shutdown {east | west}
[no] rpr-ieee shutdown {east | west}
This command is similar to a rpr-ieee protection request forced-switch {east | west} command on the
span. This command is essentially no different in function; it is an easier way to do the same thing.
Syntax Description Parameter
east
west
Defaults
Default is no shutdown.
Command Modes IEEE 802.17b based RPR interface configuration
Usage Guidelines Functionally, there is no difference between this command and the protection request commands.
In this command, shutdown can be shortened to shut.
Note This command cannot be cleared by transitioning the span state from OOS,DSBLD (Locked,disabled)
to IS/IS,AINS/OOS,MT (Unlocked,enabled,automaticInService or Locked,maintenance).
Examples In this example, interface is shortened to int.
Router(config)# int rpr-ieee 0
Router(config-if)# rpr-ieee shut east
Related Commands
None
Cisco ONS 15454 and Cisco ONS 15454 SDH Ethernet Card Software Feature and Configuration Guide, R8.0
A-28
Description
Specifies a shutdown on the east span of the interface.
Specifies a shutdown on the west span of the interface.
Appendix A Command Reference