Cisco ONS 15454 SDH Configuration Manual page 531

Appendix A Command Reference
show ons alarm failure port
Use this command to display the port-layer failures.
Syntax Description This command has no arguments or keywords.
Defaults
N/A
Command Modes
Privileged exec
Usage Guidelines This command displays the set of active failures for the link layer.
Examples
router# show ons alarm failure port
Port Alarms
POS0
POS1
GigabitEthernet0
GigabitEthernet1
Related Commands show interface
show ons alarm defect
Active: TPTFAIL
Active: TPTFAIL
Active: None
Active: None
Cisco ONS 15454 and Cisco ONS 15454 SDH Ethernet Card Software Feature and Configuration Guide, R8.0
show ons alarm failure port
A-55