Configuring The Ml-Series Card Crc Error Threshold - Cisco ONS 15454 SDH Configuration Manual

Chapter 21 Configuring RMON
Figure 21-6

Configuring the ML-Series Card CRC Error Threshold

Beginning in privileged EXEC mode, follow these steps to configure the ML-Series card CRC error
threshold:
Command
Step 1 ML_Series# configure terminal
Step 2 ML_Series (config)# interface interface-type
interface-number
Second Stage of Unwrapped Cisco proprietary RPR with Bidirectional Excessive CRC
Errors
Node B
Cisco ONS 15454 and Cisco ONS 15454 SDH Ethernet Card Software Feature and Configuration Guide, R8.0
Configuring the ML-Series Card CRC Error Threshold
Node C
Purpose
Enter global configuration mode.
Enters interface configuration mode.
21-13