Figure 17-9 Two-Node Cisco Proprietary Rpr Before The Addition - Cisco ONS 15454 SDH Configuration Manual

Chapter 17 Configuring Cisco Proprietary Resilient Packet Ring
Add an ML-Series Card into a Cisco Proprietary RPR
Figure 17-9 shows the existing two-node Cisco proprietary RPR with the single STS circuit and span
that will be deleted. Figure 17-10 shows the Cisco proprietary RPR after the third node is added with the
two new STS circuits and spans that will be added.
Figure 17-9 Two-Node Cisco Proprietary RPR Before the Addition
Adjacent Node 1
POS 0
POS 1
SPR 1
New Node
POS 1
POS 0
Adjacent Node 2
This STS circuit
will be deleted.
= STS circuit created on CTC
Cisco ONS 15454 and Cisco ONS 15454 SDH Ethernet Card Software Feature and Configuration Guide, R8.0
17-20