Monitoring And Verifying Eompls; Table 18-2 Commands For Monitoring And Maintaining Tunneling - Cisco ONS 15454 SDH Configuration Manual

Monitoring and Verifying EoMPLS

no ip address
spr-intf-id 1
crc 32
!
router ospf 1
log-adjacency-changes
network 1.1.1.0 0.0.0.255 area 0
network 10.10.10.0 0.0.0.255 area 0
!
ip classless
no ip http server
Example 18-4 ML-Series Card D Configuration
bridge 20 protocol ieee
!
!
interface SPR1
no ip address
no keepalive
bridge-group 20
hold-queue 150 in
!
interface GigabitEthernet0
no ip address
bridge-group 20
Monitoring and Verifying EoMPLS
Table 18-2
Table 18-2
Command
show mpls l2transport vc
show mpls l2transport vc detail
show mpls l2transport vc vc-id
Cisco ONS 15454 and Cisco ONS 15454 SDH Ethernet Card Software Feature and Configuration Guide, R8.0
18-12
shows the privileged EXEC commands for monitoring and verifying EoMPLS.
Commands for Monitoring and Maintaining Tunneling
Chapter 18 Configuring Ethernet over MPLS
Purpose
Provides information about all EoMPLS tunnels.
Provides detailed information about the EoMPLS
tunnel.
Provides information about a specific EoMPLS
tunnel.