Cisco ONS 15454 SDH Configuration Manual page 477

A
A P P E N D I X
Command Reference
The terms "Unidirectional Path Switched Ring" and "UPSR" may appear in Cisco literature. These terms
Note
do not refer to using Cisco ONS 15xxx products in a unidirectional path switched ring configuration.
Rather, these terms, as well as "Path Protected Mesh Network" and "PPMN," refer generally to Cisco's
path protection feature, which may be used in any topological network configuration. Cisco does not
recommend using its path protection feature in any particular topological network configuration.
This appendix provides a command reference for those Cisco IOS commands or those aspects of
Cisco IOS commands that are unique to ML-Series cards. For information about the standard
Cisco IOS Release 12.4 commands, refer to the Cisco IOS documentation set available at
http://www.cisco.com/univercd/cc/td/doc/product/software/ios122/.
Cisco ONS 15454 and Cisco ONS 15454 SDH Ethernet Card Software Feature and Configuration Guide, R8.0
A-1