Pos Configuration Examples; Ml-Series Card To Ml-Series Card; Figure 5-1 Ml-Series Card To Ml-Series Card Pos Configuration - Cisco ONS 15454 SDH Configuration Manual

Chapter 5 Configuring POS

POS Configuration Examples

The following sections show ML-Series card POS configuration examples for connecting to other ONS
Ethernet cards and POS-capable routers. These examples are only some of the ML-Series card
configurations available to connect to other ONS Ethernet cards and POS-capable routers. For more
specifics about the POS characteristics of ONS Ethernet cards, see
Cards."

ML-Series Card to ML-Series Card

Figure 5-1
cards.
Figure 5-1
Example 5-3
Example 5-3
hostname ML_Series_A
!
interface FastEthernet0
ip address 192.168.1.1 255.255.255.0
!
interface POS0
ip address 192.168.2.1 255.255.255.0
crc 32
pos flag c2 1
!
router ospf 1
Received 0 broadcasts (0 IP multicast)
0 runts, 0 giants, 0 throttles
0 parity
0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored
0 input packets with dribble condition detected
0 packets output, 0 bytes, 0 underruns
0 output errors, 0 applique, 0 interface resets
0 babbles, 0 late collision, 0 deferred
0 lost carrier, 0 no carrier
0 output buffer failures, 0 output buffers swapped out
0 carrier transitions
illustrates a POS configuration between two ONS 15454 or ONS 15454 SDH ML-Series
ML-Series Card to ML-Series Card POS Configuration
pos 0
192.168.2.1
fast ethernet 0
192.168.1.1
shows the commands associated with the configuration of ML-Series card A.
ML-Series Card A Configuration
Cisco ONS 15454 and Cisco ONS 15454 SDH Ethernet Card Software Feature and Configuration Guide, R8.0
pos 0
SONET/SDH
192.168.2.2
fast ethernet 0
POS Configuration Examples
Chapter 20, "POS on ONS Ethernet
192.168.3.1
5-11