Cisco ONS 15454 SDH Configuration Manual page 530

show ons alarm failure eqpt
show ons alarm failure eqpt
Use this command to display the equipment-layer failures.
Syntax Description This command has no arguments or keywords.
Defaults
N/A
Command Modes
Privileged exec
Usage Guidelines This command displays the active failures for the equipment layer. If an EQPT alarm is present, the
board fail defect that was the source of the alarm is displayed.
Examples
router# show ons alarm failure eqpt
Equipment
Active Alarms: None
Related Commands show ons alarm defect
Cisco ONS 15454 and Cisco ONS 15454 SDH Ethernet Card Software Feature and Configuration Guide, R8.0
A-54
Appendix A Command Reference