Eigrp Router Mode Commands - Cisco ONS 15454 SDH Configuration Manual
Hide thumbs
Also See for ONS 15454 SDH:
- User manual (62 pages) ,
- Manual (40 pages) ,
- Reference manual (22 pages)
Table of Contents
Advertisement
Configuring EIGRP
Table 11-4
Feature
Metric weights
Network
Offset-list
Router EIGRP
Set metric
Traffic-share
Variance
To create an EIGRP routing process, you must enable EIGRP and associate networks. EIGRP sends
updates to the interfaces in the specified networks. If you do not specify an interface network, it is not
advertised in any EIGRP update.
EIGRP Router Mode Commands
Beginning in privileged EXEC mode, follow these steps to configure EIGRP. Configuring the routing
process is required; other steps are optional.
Command
Step 1
Router# configure terminal
Step 2
Router(config)# router eigrp
autonomous-system-number
Step 3
Router(config)# network
network-number
Step 4
Router(config)# eigrp
log-neighbor-changes
Step 5
Router(config)# metric weights tos
k1 k2 k3 k4 k5
Cisco ONS 15454 and Cisco ONS 15454 SDH Ethernet Card Software Feature and Configuration Guide, R8.0
11-22
Default EIGRP Configuration (continued)
Default Setting
tos: 0
k1 and k3: 1
k2, k4, and k5: 0
None specified.
Disabled.
Disabled.
No metric set in the route map.
Distributed proportionately to the ratios of the metrics.
1 (equal-cost load balancing).
Purpose
Enters global configuration mode.
Enables an EIGRP routing process, and enters router
configuration mode. The autonomous system number
identifies the routes to other EIGRP routers and is used to tag
routing information.
Associates networks with an EIGRP routing process. EIGRP
sends updates to the interfaces in the specified networks. If an
interface's network is not specified, it is not advertised in any
IGRP or EIGRP update.
(Optional) Enables logging of EIGRP neighbor changes to
monitor routing system stability.
(Optional) Adjusts the EIGRP metric. Although the defaults
have been carefully determined to provide excellent
operation in most networks, you can adjust them.
Caution
Chapter 11 Configuring Networking Protocols
Determining metrics is complex and is not
recommended without guidance from an
experienced network designer.
Advertisement
Table of Contents
