Ctm And Rpr-Ieee; Configuring Rpr-Ieee Characteristics; Figure 26-4 Fairness Frame Format - Cisco ONS 15454 SDH Configuration Manual

CTM and RPR-IEEE

Figure 26-4
1
1
6
2
2
4
For comparison of RPR-IEEE frames and Cisco proprietary RPR frames, see the
Framing Process" section on page 17-5
CTM and RPR-IEEE
Cisco Transport Manager (CTM) is an element management system (EMS) designed to integrate into an
overall network management system (NMS) and interface with other higher level management tools.
CTM supports RPR-IEEE provisioning on ML-Series cards. For more information, refer to the
Cisco Transport Manager User Guide at:
http://www.cisco.com/en/US/products/sw/opticsw/ps2204/products_user_guide_list.html

Configuring RPR-IEEE Characteristics

Configuration tasks for RPR-IEEE characteristics are presented in the following sections:
•
•
•
Cisco ONS 15454 and Cisco ONS 15454 SDH Ethernet Card Software Feature and Configuration Guide, R8.0
26-6
Fairness Frame Format
TTL
Base Control
SA Compact
Fairness Header
Fair Rate
FCS
General characteristics:
– Configuring the Attribute Discovery Timer, page 26-7
– Configuring the Reporting of SONET Alarms, page 26-7
– Configuring BER Threshold Values, page 26-8
Protection characteristics:
Configuring the Hold-off Timer, page 26-9
–
Configuring Jumbo Frames, page 26-10
–
Configuring Forced or Manual Switching, page 26-11
–
Configuring Protection Timers, page 26-12
–
Configuring the Wait-to-Restore Timer, page 26-13
–
Configuring a Span Shutdown, page 26-14
–
Configuring Keepalive Events, page 26-14
–
QoS characteristics:
Configuring Traffic Rates for Transmission, page 26-18
–
Chapter 26 Configuring IEEE 802.17b Resilient Packet Ring
Header
Payload
Trailer
for Cisco proprietary RPR framing information.
"Cisco Proprietary RPR