Setting The Tool Shape - Mitsubishi Electric 700 Series Training Manual

4. Edit Screens

4.4.9 Setting the Tool Shape

Press the menu Tool setting key to display a pop-up window similar to the following, and set the tool
shape used in the solid display.
(1)
Display items
Display item
(1) Tool shape setting area
(2) Guide drawing
(3) Tool clear guidance area
Menus (when the cursor is at the tool number)
Menu
This clears the tool shape data where the cursor is located.
Specification method: Tool No. to start/end tool clear
(Example) 10/30: Data in the lines of tool No.10 to 30 will be cleared.
Tool
clear
When the INPUT key is pressed without specifying tool No., the
data in the line at the current cursor position will be cleared.
This closes the pop-up window and quits this function.
Close
This sets all tool shape items.
This displays a tool shape guide drawing.
This displays a guidance concerning the area of tool clear.
Details
10/E: Data in the lines of tool No.10 and after will be
cleared.
Details
185
4.4 Program Check (3D)
(2)
(3)
Type Reference
A "Clearing the tool
number"
C