Mitsubishi Electric 700 Series Training Manual page 125

3. Setup Screen
Menus (L system)
Menu
Copies one line of tool life management data where the cursor is
Line
copy located.
The copied tool life management data is written to the data in the line
where the cursor is located.
If the copied data is changed after the menu key Line copy
Line
paste
is pressed, the data before changing is written when pasted.
The copied data can be pasted as many times as is required until new
data is copied.
This erases a designated line (multiple lines possible) of tool life
management data.
The first and the last line No. of the data to be erased is specified with
Line
clear a " / " separating the Nos..
If the INPUT key is pressed without specifying a line, the data in
the line where the cursor is located is erased.
Operation method (Setting the tool life data) (L system)
(1) Move the cursor to the data to be set using
the , ↑ , ↓ ,
keys.
It is possible to move to the line after the
registered line.
(2) Set a value.
20 INPUT
Operation method (Copying/pasting the tool life data) (L system)
(1) Move the cursor to the line to be copied.
(2) Press the menu Line copy .
(3) Move the cursor to the line where the data
is to be pasted.
(4) Press the
Line paste
(Note 1) Once copied, the data is held until a new data item is copied.
Details
and
menu.
117
3.5 Tool Life Management
The set value displays.
The cursor moves one position to the right.
The background color of the copied data changes to light
blue.
The copied tool life management data is written to the data in
the line where the cursor is located.
The background color returns to normal.
Type Reference
C "Copying/pasting the
tool life data"
C
A "Erasing one line of tool
life management data"
"Designating and
erasing a line"