Mitsubishi Electric 700 Series Training Manual page 31

2. Monitor Screens
Display items
Display item
(1) Counter display
(2) G modal simple display
(3) Cycle time display
(4) Completed workpiece
display
(5) Machine status animated
display
(6) M, T, B commands
(7) Speed display
(8) S command,
spindle actual rotation
speed display
(9) Spindle/Wait display
(10) Load meter display
This displays the counter of the relative position and workpiece coordinates positions,
etc.
If each axis is in a specific position or status, the following status symbol appears.
#1 to #4 : No. 1 to No. 4 reference position
][ : Servo OFF state
MR : Mirror image
>< : Axis removed state
Whether to allow for the tool length compensation and tool radius compensation can
be set with the parameter "#1287 ext23/bit4".
This displays the modal status.
G command modal status of Group 1
G command modal status of Group 3
Selected workpiece coordinate system
Tool radius compensation modal, compensation No. shape compensation amount,
tool radius wear amount
Tool length compensation modal, compensation axis name, compensation No.,
shape compensation amount, tool length wear amount
This displays the automatic operation time and cycle time.
The displayed items are switched with integrated time window.
This displays the number of workpieces which have been completed.
The display follows the machining parameters "#8001 WRK COUNT M" to "#8003
WRK COUNT LIMIT".
This displays the current tool No., tool type, next command movement direction,
coordinate rotation status, mirror image status, and spindle rotation direction/coolant
status.
Note that the spindle rotation direction/coolant status display differ according to the
machine tool builder.
This displays the values command for M (miscellaneous function command value), T
(tool command value) and B (2nd miscellaneous function command value).
The presence of a 2nd miscellaneous function command value depends on
parameter "#1170 M2name".
Refer to "Manual numerical value command" for the manual numerical value
commands.
In interpolation feed:
This displays the vector direction speed currently being moved in.
In each axis independent feed:
This displays the speed of the axis with highest speed.
The actual machine feedrate is displayed with the parameters "#1125 real_f".
This displays the S (spindle command rotation speed) and spindle actual rotation
speed value.
If there are two or less spindles, the S command value and the spindle actual rotation
speed are displayed.
If there are three or more spindles, only the S command value is displayed.
The spindle tool No. and the standby tool No. are displayed.
These displayed contents differ according to the machine tool builder.
The spindle load and Z axis load, etc., are displayed in a bar graph.
If Spindle/standby display is not being used, a load meter can be displayed in the
Spindle/standby display area. These displayed contents differ according to the
machine tool builder.
23
2.1 Screen Configuration
Details