Mitsubishi Electric 700 Series Training Manual page 115

3. Setup Screen
Operation method (Erasing all groups)
(1) Press the menu
(2) Designate the group to be erased.
72 INPUT
(Note 1) If no group has been registered, the operation message " Can't delete all groups " will appears.
Operation method (Changing the group No.) (M system/L system)
(Ex.) Changing the group No. from 5 to 20
(1) Use the ↑ , ↓ ,
move the cursor to group No. 5.
(2) Press the menu
(3) Set the new group No..
20 INPUT
Operation method (Changing to the group unit display) (M system/L system)
(Ex.) Displaying the group No. 5 tool life data.
(1) Use the ↑ , ↓ ,
move the cursor to group No. 5.
(2) Press the menu
INPUT keys.
(M system/L system)
Grp all delete .
and keys to
Group change key.
and keys to
T-life group or
3.5 Tool Life Management
The confirmation message appears.
All the registered groups and their tool life management data
is erased.
The menu is highlighted.
The group No. changes to " 20 " .
The screen changes to the group unit display and the group
No. " 5 " tool life management data displays.
<M sysem>
<L system>
107