Changing The Display Angle - Mitsubishi Electric 700 Series Training Manual

4. Edit Screens

4.3.6 Changing the Display Angle

This is used to set the graphic drawing display angle when in 3-dimension display mode.
Press the menu key or cursor keys to rotate the cubic displayed at the screen upper right and press the
INPUT to set.
(Note 1) When the display angle is changed, the graphics displayed up to that point are erased.
(Note 2) The set display angle is maintained even after rebooting the machine.
(Note 3) The display angle can be set independently at the trace function and program check function.
These settings are not linked with one another.
Operation method
(1) Press the menu Rotate .
(2) Use the Up , Down ,
menu to adjust the display angle.
The cursor movement keys ( ↑ , ↓ ,
← , → ) can also be used to rotate.
(3) Press the INPUT key.
(Note 1) The set display angle is maintained even after rebooting the machine.
The mode changes to the rotation mode and the following
menu appears.
Rotate the cubic display in the lower right of the screen
Left , Right
using the operation keys.
The display angle changes.
By changing the display angle, the graphic data displayed
on the screen is erased.
174
4.3 Program Check (2D)
Up Down Left
Z
X
Y
Right
Z
Y
X