2. Monitor Screens
Operation method
(1)
Press the main menu
Instead of the operation above, the axis
name address key can be pressed to set
the counter.
(Example)
(2) Input a numeric value.
(Example) 100.000 INPUT
If the INPUT key is pressed without
inputting a value, zero (0) will be set.
(3) Repeat step (2) for each axis.
For axes that are not to be operated, press
the ↓ key and move the cursor.
.
Counter set
Z
The relative position counter opens as a pop-up window.
The cursor appears at the No. 1 axis of the relative position
counter.
The relative position counter opens as a pop-up window.
The cursor appears at the designated axis (Z axis).
The set value "100.000" appears at the cursor position. The
cursor moves to the next axis.
The pop-up window closes when the counter has been set
for the last axis.
52
2.11 Counter Set