Selecting A Device, Directory, And File - Mitsubishi Electric 700 Series Training Manual

4. Edit Screens

4.5.2 Selecting a Device, Directory, and File

This section explains the file device, directory, and file name specification methods for the file transfer and
erase commands etc. performed on this screen.
Operation method (Selecting an NC memory program)
(1) Press the
M
(2) Press the menu File set .
Memory
By pressing the operation menu at this point, it is possible to change the device.
When selecting the file name from the list
(3) Move the cursor to the file name to be
selected, and fix.
↑ , ↓ ,
When inputting the file name from the input area:
(3) Input the file name.
10013 INPUT
short cut key.
HD Serial Memory
card
INPUT
The device name changes to "Memory".
"Program" appears in the directory.
The NC memory program list and input area appear.
The menu appears as follows.
DS Ethernet FLD
The selected file name appears.
The list and input area are cleared, and the screen
returns to the original display.
The menu returns to its original display.
The input file name appears.
The list and input area are cleared, and the screen
returns to the original display.
The menu returns to its original display.
194
4.5 Program Input/Output
List Sort Retn
update change