Turning Plc Switches On/Off - Mitsubishi Electric 700 Series Training Manual

2. Monitor Screens

2.20.1 Turning PLC Switches ON/OFF

Operation method (To turn switch "#6 Program restart" ON)
(1) Press the menu
(2) Press "Y" or
(3) Press the cursor keys
move the cursor to "#6".
(4) Press the menu key ON .
To turn OFF, press the menu key OFF.
(Note 1) If the Setting valid menu or
the PLC switch setting mode will be canceled.
(Note 2) The PLC switch setting mode is canceled when the PLC switch's pop-up window is closed.
(Note 3) The cursor will not appear in modes other than the PLC switch setting mode.
Setting valid .
INPUT
↑ and ↓  t o
The menu Setting valid will be highlighted.
A message confirming the start of PLC switch setting will
appear.
The PLC switch setting mode will be entered.
The cursor will appear at the PLC switch No. position. The
menu keys ON and OFF will appear normally.
The #6 number is highlighted.
The "#6 Program restart" switch turns ON, and a * mark
appears.
a * mark appears.
key is pressed again during the PLC switch setting mode,
75
2.20 PLC Switch Function