Mitsubishi Electric 700 Series Training Manual page 113

3. Setup Screen
<L system>
This screen is enabled only for tool life management type II (parameter " #1096 T_Ltyp " = 2).
The tool life management data currently being used and the group list display.
(1)
(3)
(4)
(5)
(2)
Display items (L system)
Display item
(1) Chosen Tool
(2) Regist group list
[
CHOSEN TOOL]
Display item
(3) Group
(4) Tool No.
(5) Comp No.
(6) Mthd
(7) Used
(8) Total
(9) Life
(10) ST
The life management information of the tool currently being used appears here.
The group Nos. registered as the tool life management data are displayed in a list.
Group Nos. can be set from 1 to 9999, and maximum 80 groups can be set.
An asterisk will be added to the No. of the group in which all tools have reached their
lives.
(Note) The maximum number of the registered groups depends on the option.
Displays the life management group No. currently being used.
Displays the tool No. currently being used.
Displays the compensation No. currently being used.
Displays whether the group currently being used is controlled by
the usage time or usage count.
Displays the usage data for the tool currently being used.
Displays the total usage data for the tool currently being used.
In the case of tools using multiple compensation Nos., the total
usage data for all compensation Nos. displays. In the case of only
one compensation No., the same value as " Used " displays.
Displays the life value for the tool currently being used.
Displays the status of the tool currently being used.
105
3.5 Tool Life Management
Details
Details
(10)
(9)
(8)
(7)
(6)
Display range
1 to 9999
1 to 999999
1 to 80
0: Time
1: Count
Usage time:
0 to 99999999 (s)
Usage count:
0 to 999999 (set)
Usage time:
0 to 99999999 (s)
Usage count:
0 to 999999 (set)
Usage time:
0 to 99999999 (s)
Usage count:
0 to 999999 (set)
0: Unused tool
1: Used tool
2: Normal life tool
3: Skipped tool