Mitsubishi Electric 700 Series Training Manual page 107

3. Setup Screen
Menus
Menu
Set the magazine pot number and press the
Pot
that pot number at the top and display the tool number.
No.
The cursor moves to the tool number for that pot number.
This sets or erases the tool No. of spindle and standby tools.
Spindle
The cursor will move to the top tool No. of the spindle and standby
standby
tools and the setting mode will be entered.
This erases all the currently selected magazine tool data (tool number
and D).
Magazn
clear
(Note 1) Unselected magazine tool data is not erased.
(Note 2) The spindle and standby data cannot be erased.
This designates the magazine No. to be displayed on the screen.
Magazn
1 The displayed menu differs according to the machine specifications.
[Ex.] When there are two magazines, only the menu
:
and
:
Magazn
5
The cursor moves to the PLC command setting area and the mode
PLC
changes to the setting mode.
command
Details
Magazine 2 keys display.
INPUT key to position
Magazine 1
99
3.4 Tool Registration
Type Reference
A 3.4.1 Registering a Tool
in the Magazine Pot
A 3.4.3 Setting/Erasing the
Tool No. of
Spindle/Standby Tools
A 3.4.3 Setting/Erasing the
Tool No. of
Spindle/Standby Tools
B 3.4.1 Registering a Tool
in the Magazine Pot
B 3.4.2 Setting the PLC
Command