Edit Screens; Screen Configuration - Mitsubishi Electric 700 Series Training Manual

4. Edit Screens

4. Edit Screens
The Edit screen is used to edit the machining program (adding, erasing and changing), perform checks, and
input/output data.

4.1 Screen Configuration

The Edit screen is configured as shown below.
Left
area
Menus
Menu
This edits the machining program.
This checks the program.
This is used to check the machining program without performing
automatic operation.
(1) Program check (2D)
This displays a graphic drawing of the machining program
movement path.
(2) 3D solid graphic check
This displays a solid graphic drawing of the workpiece shape and
tool movement during the cutting process in the machining
program.
This menu does not display if there is no program check function
option.
This creates the part program simply.
Refer to the following manuals for detail.
700 Series Simple Programming Function NAVI MILL Instruction
Manual (IB-1500144(ENG))
700 Series Simple Programming Function NAVI LATHE Instruction
Manual (IB-1500146(ENG))
This performs the machining program input and output between the
NC internal memory and the external input/output device.
Details
143
4.1 Screen Configuration
Right
area
Type Reference
4.2 Program Editing
4.3 Program Check (2D)
4.4 Program Check (3D)
4.5 Program
Input/Output