Inserting Data - Mitsubishi Electric 700 Series Training Manual

4. Edit Screens

4.2.10 Inserting Data

Operation method
(1) Move the cursor to the position where
data is to be inserted.
(2) Press the
INSERT
(3) Set the data.
(4) When the setting is completed, press the
INPUT key.
(Note 1) Up to 256 characters can be set in one line.
(Note 2) The insertion mode will be finished if a key such as
, ← , → , | ← , → | ,
↓
(Note 3) During regular editing, EOB ( ; ) is added to the line without EOB ( ; ) before moving to the next
line; EOB ( ; ) is not added to the the line with EOB ( ; ). (No cursor movement.)
(Note 4) During mass-editing, linefeed is inserted every time EOB ( ; ) is input. (Cursor moves to the
head of next line.)
key.
or pressed.
154
The insertion mode is entered.
" " " "
INS and appear to the right of the file name.
Editing
The data is inserted before the cursor position. Data after
the cursor moves to the night.
The set data is fixed.
The cursor does not move, but if there is no EOB ( ; ) at the
end of the line, it will be added. Then, the cursor moves to
the next line.
The mode returns to the overwrite mode, and the message
" "
Editing disappears.
,
DELETE
4.2 Program Editing
, , ,
C.B CAN INPUT
↑
,