Mitsubishi Electric 700 Series Training Manual page 241

6. Maintenance Screens
Menus
Menu
A arbitrary parameter No. can be selected.
When the parameter No. is set and the
Param
No.
parameters will appear with that No. at the head. The cursor will also
move to that No.
This copies the parameter setting values in the designated range.
Area
The range is designated with numbers.
copy
This pastes the range of parameters designated in area copy. They
are pasted in a parameter corresponding to the axis or part system
Area
where the cursor is.
paste
Once copied, a parameter can be pasted any number of times until a
new parameter is copied.
This can be selected when there are five or more display axes in the
selected part system.
Next
axis
This is used in the screen for the parameters having an array structure
for each axis.
This can be selected when there are two or more screen display part
Next
systems.
system
Use this with the parameter screen for each parameter.
This can always be selected when the base part system parameter
screen is open.
The display changes to the PLC axis display when this menu is
pressed.
This changes the screen to the user parameter screen.
Process
(Note) The barrier data is displayed only for the L specifications.
param
Control
param
Axis
param
Operate
param
Barrier
data
I/O
param
Ethernet
param
Link
param
Subpro
stor
Details
INPUT key is pressed, the
233
6.1 Parameter Screens
Type Reference
A 6.1.2 Selecting the
Parameter No.
A 6.1.4 Copying/Pasting
Parameters
B
C -
C -
6.1.6 Machine
Parameters
C 6.1.5 User Parameters