Mitsubishi Electric 700 Series Training Manual page 164

4. Edit Screens
Operation method (Deleting designated lines)
(1) Press the
Line clear
(2) Designate the deletion range.
(Ex.) From line 8 to line 10
8/10 INPUT
When deleting 1 line, it is also possible to
make a selection using the ↑ , ↓
and designate by pressing the
key.
(3) Press the
Y or
Press the N key not to delete.
(Note 1) If the INPUT key is pressed without setting a line No., the line where the cursor is will be
deleted.
(Note 2) If the last line of the file is the range to be deleted, the last line can be designated as "E".
(Example) From 8th line to last line : 8/E
(Note 3) Mass-editing has restrictions below.
• The range has to be within 100 lines.
• Last line designation switch "/E" is invalid.
(Note 4) "Executing" is displayed in flickering during line clear.
Operation method (Deleting several lines (one screen of data) displayed on a screen)
(1) Press the
CAN
(2) Press the
INPUT key.
menu.
keys
INPUT
INPUT key.
From 1st line to last line: /E
key.
The menu is highlighted.
The cursor appears at the lower input area.
The background color for the range to be deleted turns light
blue.
"
The message Erase ? (Y/N)
The data in the range with the blue background is deleted
and the menu highlight returns to normal.
The lines following the deleted data are shifted upward.
The cursor position and top line No. do not change.
Data (machining program) for 1 screen is deleted, and
" "
Editing appears.
The edited machining program is saved to the device and
" "
Editing disappears.
156
4.2 Program Editing
"
appears.