Mitsubishi Electric 700 Series Training Manual page 183

4. Edit Screens
4.4 Program Check (3D)
Program check (3D) is a function that draws the workpiece shape and tool movement in the cutting process
of the machining program as a solid image without executing automatic operation. The machining program
can be checked with graphic data drawn at a high speed.
This function requires workpiece and tool shape settings.
Using All display menu, normal display and full-screen display modes can be switched.
(Note 1) The program check (3D) function is an additional specification. The graphic check and 3D solid
graphic check option is required.
(Note 2) When changing the screen to the edit screen, display depends on the previous checking type
(2D/3D). Note that when selecting this screen during graphic trace, 3D solid program check will
apply.
If the 3D solid check option is not valid in this time, the area of Check tag will not be blank.
■ Normal display (full-screen display mode is OFF)
(1)
(2)
(3)
(4)
Display items
Display item
(1) Check counter
(2) 3D drawing area
<Drawing area>
G90 G03 G41
This displays the axis counter for check drawing. The displayed counter type and
axis names (3 axes) are set in the parameters.
[Counter]
#1231 set03(bit5)
[Axis name]
#1026 - #1028
(Note) When the setting values of #1026 to #1028 have been changed, the changed
values will be reflected in the check counter display when the power is turned
ON again.
This area is used to display a solid graphic drawing of the workpiece shape and tool
movement during the cutting process in the machining program.
The drawing viewpoint can be moved, and the drawing size can be enlarged and
reduced.
Details
0: Machine position counter,
1: Workpiece coordinate position counter
base_I, base_J, base_K
175
4.4 Program Check (3D)
(5)
(6)