Mitsubishi Electric 700 Series Training Manual page 120

3. Setup Screen
Menus (M system)
Menu
This displays the data of a group when that group No. of tool life
Group
management data is set and the
No.
No. can be referred to in the group list.
Copies one line of tool life management data where the cursor is
Line
copy located.
The copied tool life management data is written to the data in the line
where the cursor is located.
If the copied data is changed after the menu
Line
paste
is pressed, the data before changing is written when pasted.
The data in the copied line can be pasted as many times as is
required until new data is copied.
This erases a designated line (multiple lines possible) of tool life
management data.
The first and the last line No. of the data to be erased is specified with
Line
clear a " / " separating the Nos.
If the INPUT key is pressed without specifying a line, the data in
the line where the cursor is located is erased.
This changes a group No.
If a new group No. is set and the INPUT key pressed, the group
Group
change
No. changes.
An error occurs if a pre-existing group No. is set.
This scrolls the display of the tool life management data to the left and
right.
Horiz
The items below display alternately each time the menu is pressed.
scroll
1. Tool No., ST, Mthd, L compen, R compen
2. Tool No., Auxil, Life, Used
Displays the previous group No. data.
Prev
group
Displays the next group No. data.
Next
group
This displays the list of tool life data groups.
Group
list
This creates a new group.
Group
regist
This erases all tool life management data contained in the currently
Group
displayed group No.
delete
Details
INPUT key is pressed. The group
Line copy
112
3.5 Tool Life Management
Type Reference
A "Designating a group
No."
C "Copying/pasting the
tool life data"
C
A "Erasing one line of tool
life management data"
"Designating and
erasing a line"
A "Changing a group No."
C
C
C
C
A "Registering a group"
A "Erasing a group"