Mitsubishi Electric 700 Series Training Manual page 66

2. Monitor Screens
<L system>
(1)
(2)
(3)
(4)
(5)
(6)
(7)
(8)
(13)
Display items
This displays each modal state.
Display item
(1) G01 ... G94
:
G69 ... G42.1
(2) G54.1:P10
(3) TX : -12.345
(4) TZ : 12.345
(5) TY : 10.000
(6) TG : 123
(7) TW : 123
(8) V 12345678
(9) FA 24000.00
(10) FM 1200.00
(11) FS 0.0000
(12) FE 0.0000
(13)
S1 to S4
M1 to M4
T1 to T2
B
(Note) Fixed cycle programs
When a fixed cycle command is executed, the G command in the fixed cycle subprogram is not
affected by the G modal in the called program.
Status of currently executed G command modal
Extended workpiece coordinate system
The total value of the first axis' tool length and wear compensation amount for the tool
being used
The total value of the second axis' tool length and wear compensation amount for the
tool being used
The total value of the additional axis' tool length and wear compensation amount for
the tool being used
Tool length compensation No.
Wear compensation No.
Modal value for constant surface speed spindle rotation speed (V1 to V4)
F modal value of currently executed program command
Manual federate
Program command synchronous feedrate modal value
Thread lead command synchronous feedrate modal value
Program command modal value of each currently executed command
S command
M command
T command
2nd miscellaneous function (B) command
58
2.14 Modal Display
Details
(9)
(10)
(11)
(12)