Mitsubishi Electric 700 Series Training Manual page 26

1. Operating the Setting and Display Unit
Operation method
If the ? key is pressed on any screen, the alarm guidance window will open. If a pop-up window other than the
alarm guidance window is open, the alarm guidance window will open over the currently opened pop-up
window. In this case, the menu state does not change. If ? key or CANCEL key is pressed again when the
guidance window is open, the guidance window will close and the screen will return to the previous state in
which the ? key was pressed.
Displaying the alarm guidance
(1) Press the ? key during occurring alarm on
operation screen.
(Ex.) When "H/W stroke end axis exists"
and another alarm occur.
(Note 1) The alarm guidance is executed for the alarm that is occurred when the ? key has been pressed.
Therefore, the guidance will be displayed continually even if the alarm is reset while the alarm
guidance is displayed. The alarm guidance is not executed for the alarm that has occurred while
the alarm guidance is displayed.
(Note 2) If the ? key is pressed when an alarm is not occurring, the operation/parameter guidance
appears. In this state, if the "alarm" tag is selected with the right frame key, nothing is displayed in
the message, details and remedy columns. (These columns are blank.)
(Note 3) All the explanations of the alarm having the same error class and No. are displayed in the details
column.
The guidance window is opened while "alarm" tag is valid.
The alarm details and remedy are displayed for "H/W stroke
end axis exists".
18
1.10 Guidance Function