Mitsubishi Electric 700 Series Training Manual page 41

2. Monitor Screens
(10) Set the position to restart search in the
setting area.
P sets the number of times that the block targeted for the restart search appears.
For example, if a block in a subprogram is searched, and the subprogram is called out several times,
the block to be searched is also executed several times. Thus, which execution block to be searched
must be set. (If "0" is set, it is handled in the same manner as "1".)
To search the first execution block, or to search for a block executed only once, this item does not
need to be set.
(11) Press the INPUT or Search exec
menu.
Delimit the ONBP number in the setting area using /.
<When O No. was attached>
The restart search is executed at designated position by
NBP No. with the set O No. at the head.
(Ex.) 123.PRG/6/2/1
<When O No. was not attached>
The program currently searched is targeted.
(Ex.) /6/2/1
Restart search is executed.
The message "In restart search" appears during the search
process, and the message "Restart search complete"
appears when completed.
Each axis' restart position and the restart remaining distance
are displayed.
When the MSTB history menu is pressed, the MSTB
history screen will open as a pop-up window, and the M, S, T,
B command used in the machining program will be listed.
33
2.3 Restart Search