Mitsubishi Electric 700 Series Training Manual page 195

4. Edit Screens
Registering the tool data
A maximum of 80 tools can be registered.
(1) Use the cursor keys to move the cursor to
the tool number setting. column.
The cursor can be moved freely from the
1st to the 80th line regardless of the
number of tools being registered.
(2) Input the Tool No.
(Ex.) 10 INPUT
(Note 1) Register a new tool data to set the default value for the tool type, tool radius, tool length, and
shape data 1,2, and tool color.
(Note 2) If two or more of the same tool number is registered, the tool shape data that is registered first is
selected.
(Note 3) When an unregistered tool is selected, the previously used tool is used as is.
Clearing the tool data (Clearing tool data for one line at the cursor position)
<When inputting directly>
(1) Use the cursor keys to move the cursor to
the tool number setting column.
(2) Input as shown below.
0 INPUT
<When using menu operations>
(1) Use the cursor keys to move the cursor to
the tool number setting column.
(2) Press the menu Tool clear .
(3) Press the
INPUT key.
(4) Press the Y or INPUT key.
Press any key other than
INPUT to cancel.
" 10 " appears at the cursor position.
The cursor moves one place to the right.
The contents of the line where the cursor is located are all
cleared.
The cursor does not move.
The menu is highlighted.
Background color of the line at the cursor position is turned
to light blue.
The operation message
"Erase?(Y/N)" is displayed.
The contents of the line where the cursor is located are all
cleared.
Background color of the line at the cursor position is
Y and
returned.
The cursor does not move.
The menu highlight is returned to normal.
187
4.4 Program Check (3D)